P8 Outdoor LED Module

  • Pixel Pitch: 8mm
  • Module Size: 256*128mm
  • Module Resolution: 32*16
  • Refresh rate: 3840hz
  • RGB Full color for outdoor use
  • 2 Years Warranty

P8 LED module refers to an outdoor LED display module with a pixel pitch of 8mm. The module size is usually 320*160mm and 256*128mm. It has a high brightness of more than 4500nits and an IP65 protection level, and can operate stably under various weather conditions.

 It is widely used in outdoor LED display screens for viewing at medium and long distances, such as billboards, information display screens, traffic guidance screens, etc.

Main components

LED Lamp

LED lamp beads are the core display components, usually three-in-one full-color lamp beads (such as SMD3535)

LED Mask & Kit

Form a complete structure to protect the lamp beads from impact and facilitate installation and splicing

Driver IC

Controls the brightness uniformity, stability and grayscale level of the lamp beads (such as constant current driver chip)

PCB board

The basic circuit platform that carries LED lamp beads, driver ICs and other components, ensuring stable conductivity

P8 LED Module Size

320*160mm LED module

The P8 LED module is 320mm wide and 160mm high, with a module resolution of 40*20 dots. It is suitable for 640*960mm , 960*960mm outdoor LED display cabinets.

If the module is used alone as a light-emitting screen, UnifyLED will provide you with a complete set of important accessories such as the corresponding power cable, signal cable, and receiving card.

256*128mm P8 LED Module

It is a standard unit commonly used in outdoor display screens, with a pixel pitch of 8mm and a module resolution of 32×16 dots. It uses DIP346 or SMD3535 lamp beads, with a brightness of up to 5500cd/m², and supports all-weather visibility. The protection level is IP65, suitable for scenes such as advertising screens and traffic guidance screens.

Key Features

IP65 Waterproof

Outdoor P8 modules need to be coated with waterproof three-proof paint, or encapsulated with sealant to ensure waterproof, dustproof and corrosion resistance.

 
Wide viewing angle
High contrast and wide viewing angle design, no matter from which angle the image is viewed, it remains stable and clear, providing consistent visual effects.
Modular design:
Flexible modular structure, you can freely splice screens of different sizes and shapes according to needs to meet a variety of display needs.
High Refresh Rate

Carefully selected LED drivers s allow P8 LED panel to deliver high refresh rates up to 3840Hz, resulting in flicker-free operation in module applications.

P8 LED Module Specification

Pixel Pitch8mm
Panel Dimension320(W)x160mm(H)
256(W)x128mm(H)
Pixel Resolution40×20 dot
32×16 dot
Pixel Configuration1R1G1B
LED specificationSMD 3in1
Scan RateConstant current 1/4, 1/5 scan
Hor. viewing angle160°
Vert. viewing angle160°
Best View Distance8m – 80m
Grey Level14 bits
Brightness≥5500 cd/㎡
Brightness Adjustment100-grade auto/manual-adjustment
Brightness Uniformity>99%

Image Gallery

P8 outdoor LED Module Details

FAQs:

 A P8 LED module is an LED display unit with a pixel pitch of 8mm, commonly used for outdoor large screens such as billboards and traffic signs. It offers high brightness and visibility for long-distance viewing.

The optimal viewing distance for a P8 LED display is around 8 to 80 meters. It’s ideal for outdoor applications where viewers are not close to the screen.

 Yes, P8 LED modules are mainly designed for outdoor use. They typically feature waterproof design (IP65 or above), high brightness (over 5000 nits), and strong durability.

Resolution depends on the module size. For example, a 320mm x 160mm P8 module typically has a resolution of 40×20 pixels. The larger the screen, the higher the total resolution.

Common P8 LED module sizes include 320x160mm, 256x128mm, and 192x192mm, depending on the manufacturer and design.

The main difference is pixel pitch: P8 has 8mm spacing, while P10 has 10mm. P8 offers higher resolution and better image clarity at the same screen size, but usually at a slightly higher cost.

Prices vary by supplier, configuration, and size. As of recent data, the average price for outdoor P8 LED displays ranges from USD 200 to 500 per square meter, excluding installation and control systems.

Recommend Products​

Typical application scenarios of P8 LED modules:

Outdoor advertising screen

Installed on building exterior walls, commercial streets, gas stations, parking lot entrances, etc., for playing commercial advertisements and brand promotional videos.

 P8 has the advantages of high brightness, strong waterproofness, and long viewing distance, which is very suitable for such scenarios.

Traffic guidance screen

Variable message signs (VMS) used in highways, urban roads, and toll booths are used to display traffic conditions, speed limit information, etc. in real time, requiring all-weather readability. P8 modules provide good clarity and high reliability.

Square information display screen

Such as in front of city squares, community squares or government service centers, used to publish public information such as notices, weather, and news. 

P8 modules are suitable for large-size displays, eye-catching information transmission, and wide coverage.

Stadium and event site screens

Used for live broadcasts, score displays, advertising playback, etc., such as football fields, basketball halls, concerts, temple fairs and other event sites. 

P8 can meet the needs of large viewing angles, long-distance viewing, and high-definition communication.

Station/Airport Outdoor Information Display

Displaying schedule information, announcements or commercial advertisements in waiting areas, squares in front of stations, etc., the P8 module ensures strong visibility in the sun and convenient maintenance.

Industrial Park or Enterprise Gate Display

Installed at the factory gate or in front of the office building, playing corporate promotional videos, safety production reminders, etc., the P8 LED module ensures that the content is eye-catching and visible all day.

outdoor led wall in Nigeria
P8 LED screen in UK
Outdoor LED display in germany
3D Outdoor led wall in America
Outdoor LED screen in Spain
Outdoor Advertising Screenin Colombia

P8 LED Module Aging Test

Definition and purpose: Aging test is to detect the stability, brightness, color temperature and other performance of LED modules to ensure long-term stable operation of the product.

All UnifyLED LED modules will undergo 48-72 hours of aging test after production. Assemble the module on the steel structure frame, light up the P8 LED module, and use red, blue, green and white to detect whether the color display of the LED lamp beads is intact.

Aging test can not only eliminate unqualified products, but also increase the service life of the module.

Qualified P8 LED modules can ensure high stability and high brightness during long-term use and reduce the occurrence of failures.

老化测试视频+工厂机器生产模组的视频

Contact Us

Order LED Screen? Please feel free to contact us at any time, and we will respond to you within 24 hours.